"DEVELOP & MAKE & SALES"
|
||
PRO-10-HS / PRO-12-HS |
|
Controller:
|
Drinking die altitude
The computer achieves the best cutting angle according to the drinking die plate highly automatic control.
The side depends
the side depending on for two-sided depends, if rear end is unable to assist depending on Qi Yin=ban, frist depending on will depend automatically neat, will depend on the advantage for the double auxiliary side.
SPECIFICATIONS |
MODEL | HH-PRO-10-HS | HH-PRO-12-HS |
Maximum depth of cut | 120 mm | 120 mm |
Maximum length of cut | 3250 mm |
3850 mm |
Main saw blade diameter | 455 mm | 455 mm |
Main saw spindle diameter | 60 mm | 60 mm |
Main saw spindle rotational speed | 4000 rpm | 4000 rpm |
Vice-saw blade diameter | 200 mm | 200 mm |
Vice-saw blade spindle diameter | 45 mm | 45 mm |
Vice-saw spindle rotational speed | 6500 rpm | 6500 rpm |
Saw carriage speed | 0-60 m/min | 0-60 m/min |
Saw carriage backlash speed | 120 m/min | 120 m/min |
Main saw blade motor | 20HP/25HP | 20HP/25HP |
Saw carriage drive motor | 1.5kw (AC Servo motor) | 1.5kw (AC Servo motor) |
High pressure blower motor | 2HP*3pcs | 2HP*3pcs |
Automatic feed system | 2kw (AC Servo motor) | 2kw (AC Servo motor) |
Automatic panel feed spdde | 0-80 M/min | 0-80 M/min |
Working air pressure | 7kg/cm2 | 7kg/cm2 |
Table height from floor | 980 mm | 980 mm |
Machine dimensions(L X W x H) | 5580 x 6140 x 1800 mm | 6190 x 6550 x 1800mm |
Net weigh | 6200/7000kg | 6400/7400kg |
* This company momentarily carries on the ressarch improvement the work, therefore in this table of contents the basic size prompt design chahacteristic, can change, further notice. |
Headquarters |
Copyright © 2015 HUAN HUNG WOODWORKING MACHNERY. All Rights Reserved. | Design by ACW.